Hubs & Stubs Agricultural Hubs

Hub/Stub Assy 100x100x600mm 6250kg 10x335mm PCD Bolt-on Cap TVZ

NZ $2,150.00 excl GST
SKU: 98079
Sorry, the selected product is currently out of stock. Sorry, there are only 4 of this item currently in stock. the selected product is not available.

Description

The TVZ 6,250 kg hub and stub axle assembly is the largest unbraked agricultural unit in the TVZ range, built for extreme-duty trailers and implements. With a 100 mm square stub and 600 mm shaft length, it supports up to 6,000 kg at 40 kph. The 10-stud hub features a wide 335 mm PCD and 280 mm centre bore, secured with M22 x 1.5 mm studs for maximum load stability. Precision taper roller bearings (32213/32216) ensure smooth, consistent performance under heavy loads. A bolt-on TVZ cap with a dual lip oil seal and integrated grease nipple keeps out mud, dirt, and water, while the spigot mount reduces pressure on the wheel nuts. The entire assembly is coated in heavy-duty black primer for long-lasting corrosion protection.

Key Features

  • 100 mm square stub axle with 600 mm shaft length
  • Load capacity of 6,000 kg at 40 kph
  • 10-stud hub with 335 mm PCD and 280 mm centre bore
  • M22 x 1.5 mm studs for secure wheel fitment
  • Precision taper roller bearings: 32213 (front), 32216 (rear)
  • Bolt-on TVZ cap with dual lip oil seal and grease nipple
  • Spigot mount eases pressure on wheel nuts
  • Heavy-duty black primer coating for rust and corrosion resistance
  • Weld-on fixing for secure installation
  • Pre-assembled for fast, hassle-free setup
  • Manufactured in Italy

Applications

  • Agricultural trailers
  • Implements and machinery used in off-road or low-speed farm environments
  • Ideal for unbraked axle setups requiring maximum strength and wide stud spacing

Specifications

  • Stub Axle Size: 100 mm square
  • Shaft Length: 600 mm
  • Load Capacity (at 40 kph): 6,000 kg
  • Stud Pattern: 10-stud
  • PCD: 335 mm
  • Centre Bore: 280 mm
  • Stud Size: M22 x 1.5 mm
  • Bearings (Front/Rear): 32213 / 32216
  • Fixing Type: Weld-on
  • Coating: Heavy-duty black primer
  • Cap Type: Bolt-on TVZ cap with grease nipple and dual lip seal

Inclusions

  • 1 x Stub axle (100x100x600 mm)
  • 1 x 10-stud hub (335 mm PCD, 280 mm c/bore)
  • 1 x Bolt-on TVZ cap
  • Pre-fitted bearings: 32213 (front), 32216 (rear)

Specifications

Fixing: Weld on
PCD: 10x335mm

Questions?

In order to assist us in reducing spam, please type the characters you see:

You might also be interested in ...